The TurfMaker ® 800 Hydroseeder
EXCLUSIVE TURFMAKER® FEATURES:
- Powerful Mechanical Agitation
- Positive Displacement Gear Pump
- Optional Clear Water Hose Flushing System
- Optional Self Filling with Auxiliary Tank
- Optional Trailer (Two 6,000 lb Axles w/Brakes)
- Optional Tower (not shown)
MULCH CAPACITIES:
- Wood Mulch (100%) - 325 lbs per tank load
- Paper Mulch - 475 lbs per tank load
- Blended Mulch - 400 lbs per tank load
The Ideal Machine for Any Job — Large or Small !
The TurfMaker ® 800 hydroseeder is large enough to provide thick wood mulch applications on small home lawn sites, or thin “hydro-seeding” applications on as much as 25,000 square feet. Either tank load can be loaded, mixed, and applied in less than thirty minutes. In addition, up to as many as 20 tank loads can be applied in a normal workday, assuming water for re-filling is readily available. Availability of water is never a problem with a TurfMaker ® 800. The best productivity is usually accomplished utilizing a fire hydrant for loading. However, when a fire hydrant is not available, the machine can fill itself from an auxiliary water tank using the exclusive TurfMaker ® self-filling system.
The TurfMaker ® 800 hydroseeder, with its powerful, direct-drive mechanical agitation system can quickly mix up to 325 pounds of 100% Wood Fiber Mulch or up to 500 pounds of shredded paper in one tank load. With the positive displacement pump, thick mulch slurries can be pumped through up to 500 feet of hose, and then spray more than 75 feet from the end of the hose. For the best and highest quality applications, tackifiers are always recommended. Slicky Sticky ® is a leading erosion control tackifier product that also makes the slurry extremely slick, reducing or eliminating clogs completely. Slicky Sticky ® also increases moisture retention and enhances seed germination.
The TurfMaker ® 800 hydroseeder can be mounted on a heavy duty flat bed truck, on a heavy-duty utility trailer, or can be purchased on the custom heavy duty two axle trailer shown above. The TurfMaker ® 800 hydroseeder is large enough to cover a lot of area with one tank load, and small enough to be taken into places larger machines can’t go. It provides fast and efficient performance with wood mulch for the quality-minded landscaping contractor.
The TurfMaker ® 800 - Technical Specification
Recommended Loading: *
- Wood Mulch (100%) - 325 lbs
- Blended Mulch - 400 lbs
- Shredded Paper - 475 lbs
Tank Load Coverage:
- Medium Rate - Wood Mulch: 7,000 sq.ft.
- Heavy Rate - Wood Mulch: 4,000 sq.ft.
- Light Rate - Paper MulchL: 24,000 sq.ft.
Loading and Mixing Time: 6 minutes or less
Application Time:
- 25 GPM to 50 GPM - hose: 16-32 minutes
- 50 GPM to 150 GPM - tower: 6-16 minutes
Typical Cycle Time: (Total time to get water, load, mix, and apply one tank load.) 22-45 minutes
Pumping Capacity: **
- Up to 500 ft - hose
- Up to 125 ft - tower
Tank:
- 10 Gauge Steel
- 800 Gallons Total Capacity
Paint (after sandblasting): Epoxy & Polyurethane
Weight:
- Empty- 2,400 lbs.
- Loaded- 8,200 lbs.
Skid Dimensions (footprint): 47” x 150½”
Overall Width, Length, Height: 56”, 153”, 60”
Standard Engine: Briggs Vanguard 16 - 23 HP
Numerous Engine Options:
- Honda 18-25 HP
- Kohler 18 - 27 HP
Standard Pump:
- Double Rotary Gear - Positive Displacement
- Hardened Plated Case, Stainless Steel Wear Plates, Extended Bearings
Trailer Option: Two 5,200 lb Axles (Brakes Both Axles)
* Some mulches can be loaded heavier than others.
** Get Maximum Distance with Slicky Sticky® in the mix.
I'm Interested In:
First Name:
Last Name:
Phone Number:
E-mail Address:
Enter Code: